Search results

  1. Muhammad Ali Khan

    Grinding sound on cold start

    May be it is time to replace your timing chain tensioner. Check it there is any leaks there ?
  2. Muhammad Ali Khan

    Start up RPM stay at 1200 - 1350 for more than 4 to 5 mins.

    Clean your throttle body. May be your throttle position sensor is out of calibration.
  3. Muhammad Ali Khan

    Loss of power / blockade of power

    have you checked your fuel injectors or fuel injection pump. I mean complete fuel injection system. If you full throttle, have you seen any black smoke ?
  4. Muhammad Ali Khan

    Steering aggresively pull left and right on uneven road

    I experienced this once I replaced the steering rack on my honda and on any an uneven road it pulls very badly toward left. Finally I found out there is some problem in the used rack I purchased and we replace it to get rid of this. I think there may be some problem inside the rack.
  5. Muhammad Ali Khan

    Fuel System Cleaner??

    Try "Seafoam"
  6. Muhammad Ali Khan

    Electric Cable: Thin Wall Cable

    How much mass difference between these cables ? if all together you remove your spare, may be you will save more fuel :P
  7. Muhammad Ali Khan

    Here is Practical Explanation about Next Life, Purpose of Human Life, philosophical/religious facts,

    Sir You need to read Quran which is word of GOD. Marcus is the person like us and why you need to believe on someone who is same as you.
  8. Muhammad Ali Khan

    Electric Cable: Thin Wall Cable

    Thin wall = cheap
  9. Muhammad Ali Khan

    2004 corolla NZE 120

    Check for codes. May be one of your sensor is out of order.
  10. Muhammad Ali Khan

    Alignment required after front Strut (s) replaced?

    There will be slight out of alignment id you replace the struts as there is a slight play in the bolts. Usually it do not effect much. The best to see your steerting is strainer after replacing struts or if the car is pulling. If all is well there is no need for alignment.
  11. Muhammad Ali Khan

    Strange Issue: Warm engine stalling

    Of course you need to replace the cam position sensor. The ECU rely on the data from the position sensor and adjust the timing with the engine speed and temperature. If the engine is not getting the right data. It may shutdown the engine or provide the wrong timing to plugs and injectors.
  12. Muhammad Ali Khan

    Need helpfixing my car.

    Probably no Current is going to plugs/coils.
  13. Muhammad Ali Khan

    Corolla Bouncing?

    Is it bouncing when still or running ?
  14. Muhammad Ali Khan

    Break pads with yellow marks [pic attached]

    This Mark is from your parts supplier, because they sometime color the parts to identify it is for which car/model. It has nothing to do with the pad wear.
  15. Muhammad Ali Khan

    High pitched whining while accelerating

    Check your wheel bearings also.
  16. Muhammad Ali Khan

    1986 Corolla high idle

    1986 corolla is having carburetor if I am not wrong. you need to adjust the idle control valve on the carburetor. I was having the same car but with diesel engine. Diesel has a screw on the throttle to adjust the idle.
  17. Muhammad Ali Khan

    3rd gear lugging?

    I think your throttle body is dirty. you need to clean it.
  18. Muhammad Ali Khan

    Engine swap

    Engine Swap is not an easy job. Electrical connections are the main problem. Also check both the engines and transmission is exactly the same. If there is slight difference you may be in big trouble.
Top