Trd lowering spring problems

[corollin123]

hey everyone I recently bought some trd lowing springs for my 2013 Corolla S .5 in front 1.5 in rear I tried to put them on today and had no luck with the car getting lower it was the same height any tips would be appreciated maybe I'm doing something wrong and I am not seeing it thanks

 

[smasher92]

Did you use spring compressor?

 

[corollin123]

Yes I used one to take the old ones off but I didn't use one to put the trd ones on cause there shorter

 

[echarleswhyte]

did you take the car out for a drive? Sometimes when a car is jacked up it will unload the shock. After back on the ground a short drive will compress the shocks and it will regain normal ride height. Only think I can think of. Besides switching the springs do the instructions sate to remove any other components?

 

[corollin123]

I figured it out I only did one side on the front and my car has a lower sway bar connecting to the other side of course and when i lowered the car off the jack it put all the weight on the other side so I had to back up the whole front and do it that way and it ended up working out thanks for the help