Recently bought a 2004 model second hand.
A couple of days ago, there was a short delay (10-20 seconds) after turning the headlight switch on before the lamps lit up.
The next day, they didn't go at all. Since then, I once had them come on after 10 minutes or so of driving, but otherwise nothing at all. If I pull the switch inward (to flash) then the high beams come on as they should, but pushing it out to lock the high beams on does nothing.
I have checked the following:
- Fuses are fine
- Checked continuity on the lamps, they are fine (Halogens, so not a ballast problem)
- Disassembled and cleaned contacts on the light switch, does not appear to have solved the problem.
Two things puzzle me:
1. The head relay is not in the fusebox where the Toyota schematic shows it should be. The slot is empty. Anyone know where it is?
2. Voltmeter shows +12VDC on BOTH terminals of all the light fittings, whether the switch is on or off.
If I could find the relay, I could just replace it to check that for a start, then maybe move on to replacing the switch...
A couple of days ago, there was a short delay (10-20 seconds) after turning the headlight switch on before the lamps lit up.
The next day, they didn't go at all. Since then, I once had them come on after 10 minutes or so of driving, but otherwise nothing at all. If I pull the switch inward (to flash) then the high beams come on as they should, but pushing it out to lock the high beams on does nothing.
I have checked the following:
- Fuses are fine
- Checked continuity on the lamps, they are fine (Halogens, so not a ballast problem)
- Disassembled and cleaned contacts on the light switch, does not appear to have solved the problem.
Two things puzzle me:
1. The head relay is not in the fusebox where the Toyota schematic shows it should be. The slot is empty. Anyone know where it is?
2. Voltmeter shows +12VDC on BOTH terminals of all the light fittings, whether the switch is on or off.
If I could find the relay, I could just replace it to check that for a start, then maybe move on to replacing the switch...