14 Rolla suspension

[Jessie]

Have put over 130k miles on struts and can feel the difference in the. Want to replace but I believe the front have springs? Mechanics have told me they are dangerous to compress, and thoughts?
And are only the front springs? If so I can do the back struts easily, any recommendations on struts/springs(if needed).

 

[Jessie]

Update! So from research I have found that I can buy a full assembly from a decent brand like kyb or Monroe, these are easy to put on since the spring is already assembled I believe.

 

[Chris Denton]

The springs can be compressed with a spring compressor tool. You can buy a set from Harbor Freight for roughly $20usd.
Or rent one from an auto parts store.
Make sure to loosen the top center nut, before you remove the strut.
Lots of YouTube videos on it.

 

[SuperchargedMR2]

Replacing the springs is very simple with a spring compressor tool. The rear is super easy but the front isn't hard by any means. I would never use a POS strut like Monroe. The OEM is KYB or you can invest in a set of BC coilovers that are also pre-assembled and that allows you to adjust the ride height and dampening.

 

[FinalGear]

Replacing the springs is very simple with a spring compressor tool.

spring compressor tool?? did u mean zippy ties, c clamp, hack saw, & bunsen burner..right

 

[SuperchargedMR2]

spring compressor tool?? did u mean zippy ties, c clamp, hack saw, & bunsen burner..right

https://www.amazon.com/dp/B016XUXMC...a539-3bf50648070e&ie=UTF8&qid=1536209593&sr=1