Yesterday I removed the horn cover on the steering wheel and replaced the cruise control lever. It was just a matter of pulling the two screws out of the side of the steering wheel then lifting the horn cover up. the cruise lever was also just two screws and a plug. I have replaced the horn fuse and wanted to check the horn relay but I don't have the equipment to do it. I really don't know what the problem could be, the horn worked before I changed the cruise lever. I'm wondering if there is anyway the contact points are not making contact when pushing down on the horn cover. There was no type of adjustment when reattaching the horn cover, just align the screw on each side of the steering wheel and that's it. I would appreciate any comments that might help, don't want to pay a dealer if I can keep from it. Thanks.