NEW MEMBER! SOME OF MY MODS! WHAT HAVE YALL MODIFIED ON YOUR COROLLA?

[DjAnnexAlpha]

Sweet, thanks! Hey do you by chance know how I can disable the fake gear-stepping of my CVT? Also, do you know if any artificial engine noise is being piped into the cabin on my 2015 LE ? It sure sounds like it is. Way way way louder than my old 2003 Corolla.

The gear stepping was built into the CVT you can't really disable it without reprogramming the CVT. And no, I do not believe there is any artificial engine noise being piped into the cabin.

 

[DjAnnexAlpha]

@octhed If anything its too quiet! Slap on a magnaflow muffler!

 

[JoshTRD]

here are some cosmetic stuff you haven't done yet...these are my cometic stuff on my rolla interior lights,oracle foglights,fender racing stripe, door panel stickers,blacked out taillights,wind deflectors...and my personal favorite..blue engine bay Light

 

[JoshTRD]

the rest

 

[DjAnnexAlpha]

here are some cosmetic stuff you haven't done yet...these are my cometic stuff on my rolla interior lights,oracle foglights,fender racing stripe, door panel stickers,blacked out taillights,wind deflectors...and my personal favorite..blue engine bay Light

Nice. How are the oracle halos going? And to which power circuit did you tap into to power the LEDs?

 

[JoshTRD]

Im not a car genius my cousins friends did them for me but since i got them which was a year ago, i removed em ...on of the lights kept breaking or burning out...[ noob circuiting probably ] long story short after multiple fails i removed them..but they where great while they lasted ^_^

 

[DjAnnexAlpha]

Im not a car genius my cousins friends did them for me but since i got them which was a year ago, i removed em ...on of the lights kept breaking or burning out...[ noob circuiting probably ] long story short after multiple fails i removed them..but they where great while they lasted ^_^

It was most likely the lights themselves. Did your friend install an in line fuse to make sure that they didn't break?

 

[JoshTRD]

i have no clue .....im the guy who pays people to help out with my car and to not know a thing they did xD..but these are not my Stock foglight...they are completely different bulbs and they where custom fit into my corolla...a spare set

 

[JoshTRD]

after i removed the halos i put my OEM fogs back in

 

[apollard87]

heres some more mods guys! added 18in rim and got my roof wrapped!

 

[apollard87]

Did you buy the interior pieces separately and paint them or paint them yourself or what?

hi there! I just took the pieces out and painted them! the smell is annoying for a few days but it goes away!

 

[DjAnnexAlpha]

i have no clue .....im the guy who pays people to help out with my car and to not know a thing they did xD..but these are not my Stock foglight...they are completely different bulbs and they where custom fit into my corolla...a spare set

i have no clue .....im the guy who pays people to help out with my car and to not know a thing they did xD..but these are not my Stock foglight...they are completely different bulbs and they where custom fit into my corolla...a spare set

Ah I see. I ordered a spare set of fog lights that the camry and lexus uses that fit into our housings with no modification. I am gonna pop them open, paint them black, add a white halo from TRS, and add some HID's. A write up will of course follow after all that. The spare set actually uses H11 bulbs and its easier to find bulbs in that size than the H16 type 2 bulbs that our stock fog lights use.

 

[JoshTRD]

How do you all paint your headlights to give them that black eyelid? do you remove the headlight or what?

 

[Allison J]

You could use plasti-dip. I've seen people do it that way, however I myself used an overlay. They have other colors as well.
http://pages.ebay.com/link/?nav=item.view&alt=web&id=380958894918

 

[Allison J]

And I put mine on top of the headlight, as much as it killed me too...
I pulled apart my front end to get the headlight out. Once I did, I realized how incredibly sealed the headlight was, and thought about letting in condensation if I broke the seal, which would suck.

 

[JoshTRD]

And I put mine on top of the headlight, as much as it killed me too...
I pulled apart my front end to get the headlight out. Once I did, I realized how incredibly sealed the headlight was, and thought about letting in condensation if I broke the seal, which would suck.

wow awesome!! thanks for the link I've been looking for these for a while xD! yea I was not too fond of having to take apart my headlight( if that was the case)...but this seem fine..thanks!!

 

[JoshTRD]

Yes everyone, I did this to a corolla x,D...and it looks awesome....And yes it's illegal..but I'm only using for Car Meets

 

[DjAnnexAlpha]

Yes everyone, I did this to a corolla x,D...and it looks awesome....And yes it's illegal..but I'm only using for Car Meets

Haha nice! I love it. What did do use for the light? Universal LED strip or did you Ledglow?

 

[JoshTRD]

Haha nice! I love it. What did do use for the light? Universal LED strip or did you Ledglow?

It's a LED kit I bought on Amazon...took forever to snake and hide wires !!

 

[DjAnnexAlpha]

It's a LED kit I bought on Amazon...took forever to snake and hide wires !!

lol I bet. I am gonna make my own RGB underbody kit with a remote though. Where did you wire up the control button?

 

[JoshTRD]

lol I bet. I am gonna make my own RGB underbody kit with a remote though. Where did you wire up the control button?

its under my car tucked away... i heat shrunk some vinyl around the box to waterproof it and i snaked the wires from the box to the battery through the firewall connected to a imitation NOS switch by my handbrake to turn it on and off haha xD...

 

[DjAnnexAlpha]

its under my car tucked away... i heat shrunk some vinyl around the box to waterproof it and i snaked the wires from the box to the battery through the firewall connected to a imitation NOS switch by my handbrake to turn it on and off haha xD...

lmfao nice. Got pics of the inside?

 

[JoshTRD]

here are the pics of how i wired it up... the last pic is the control box mounted under my driver side door and my ghetto wiring and waterproofing xD.....

 

[DjAnnexAlpha]

here are the pics of how i wired it up... the last pic is the control box mounted under my driver side door and my ghetto wiring and waterproofing xD.....

Nice job. But it would be a much better option to use the Pilot LED Touch Button and mount it into a empty button whole to keep it looking clean.

 

[JoshTRD]

Nice job. But it would be a much better option to use the Pilot LED Touch Button and mount it into a empty button whole to keep it looking clean.

yea i was thinking that!!!...i wanted to cut out where the seat warmers would have gone and put it there...probably soon..

 

[stusmith]

Posted this one last year. Now that it's warm, probably going to do some more plasti-dip.

 

[DjAnnexAlpha]

Posted this one last year. Now that it's warm, probably going to do some more plasti-dip.

Cant even open it to make it bigger

 

[stusmith]

Ah, you're funny, DJ

Happy now??

 

[DjAnnexAlpha]

Ah, you're funny, DJ

Happy now??

Much better! Now you are about 50% finished with your own XSP version lol

 

[stusmith]

Maybe I should put one of these on my 'Rolla

 

[DjAnnexAlpha]

Maybe I should put one of these on my 'Rolla

Wow...a $50 sticker that represents an over priced add on for our cars lol why not?

 

[stusmith]

While you're at it, you could put these, these, or these. Then you'd have a really cool car

 

[Scott Lakin]

I also did the under dash lights and also the dash itself.

 

[DjAnnexAlpha]

I also did the under dash lights and also the dash itself.

Very nice! Did you use El Wire?

 

[Scott Lakin]

yeah I found it on Amazon, I plan on doing both door panels as well.

 

[Scott Lakin]

About $700 or so... I'm including a vinyl overlay I havent installed yet...once it warms up I'll be putting that on... But I want to do my rear window tint with 5% before it starts getting too hot ...a short ram intake will be bought at some time and I want coilovers too

Where did you get the vinyl rap for the interior?

 

[Scott Lakin]

About $700 or so... I'm including a vinyl overlay I havent installed yet...once it warms up I'll be putting that on... But I want to do my rear window tint with 5% before it starts getting too hot ...a short ram intake will be bought at some time and I want coilovers too

About $700 or so... I'm including a vinyl overlay I havent installed yet...once it warms up I'll be putting that on... But I want to do my rear window tint with 5% before it starts getting too hot ...a short ram intake will be bought at some time and I want coilovers too

I am also putting a vinyl hood overlay, here's a mock up of what is going to look like

 

[JoshTRD]

I am also putting a vinyl hood overlay, here's a mock up of what is going to look like

holy jesus...are you the Punisher or something? lmao

 

[Nicolas Hernandez]

did you spray the tail lights ?

 

[dieselscout80]

View attachment 596 View attachment 597
View attachment 598
IVE ALSO ADDED 2 12 INCH SUBS AND MY AMP AS WELL! SHE'S COMING TOGETHER NICELY!

Did you take any pictures with the dash pieces out of the car?

How hard were the dash pieces to remove?

 

[Moe]

here are some cosmetic stuff you haven't done yet...these are my cometic stuff on my rolla interior lights,oracle foglights,fender racing stripe, door panel stickers,blacked out taillights,wind deflectors...and my personal favorite..blue engine bay Light

Where did u get ur fog lights. They look nice.

 

[dakotahiggins42]

new corolla owner, I ahve the LE Eco I believe, and i believe that it is sitting on 16"s. I want to put some motegi racing matte black wheels on it with a red trim. I am also interested in putting some under the dash lights in, preferably blue as seen in the pictures. Any and all help is greatly appreciated guys and gals. Alsooo if anyone knows where I can buy a roof rack, please let me know

 

[Scott Lakin]

You can get the interior lights on Amazon.

 

[Scott Lakin]

Finnaly got the hood wrap done on my car. Aswell as the k&n short ram.

 

[Scott Lakin]

Here's the picture of the hood.

 

[Scott Lakin]

I just took my car for a spin around the block, and the k&n short ram works and sounds amazing!!!
I will shoot a video of the sound from inside the car while driving, then post it.

 

[Moe pmb]

Hi ....
Any one from South Africa ( KZN) in this forum
And owns a 2015 Corrolla

 

[Anthont touma]

How did u do them? They are pretty awesome !

 

[Enrique Ponce]

Nice looking ride. Mine looks pretty simple. Upgraded all lights to LED, except headlights those came LED factory, added mudflaps had to order from Canada Toyota dealer, added a JL Audio 12" sub, TRD badging and that's about it for now. Going to get the morimoto led fogs next to replace the putco led's that are in the stock housings.

 

[Chris Denton]

View attachment 2593 View attachment 2595 View attachment 2596 Nice looking ride. Mine looks pretty simple. Upgraded all lights to LED, except headlights those came LED factory, added mudflaps had to order from Canada Toyota dealer, added a JL Audio 12" sub, TRD badging and that's about it for now. Going to get the morimoto led fogs next to replace the putco led's that are in the stock housings.

Very clean!